| | Fence Project |  |
|
|
| Author | Message |
|---|
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Fence Project October 2nd 2020, 3:44 pm | |
| Fence project started today. They are driving the posts now. Using oilfield drill stem as the posts, driving them in 5ft deep. Then will weld a top rail onto them, and add 4ft no climb woven wire fencing. Getting a 14ft gate on the shop side, a 6ft gate in the rear of the property to have access to mowing the easement back there, and a 12ft gate on the other side of the house. They'll paint the posts and top rail black. Should be complete sometime early next week.  | |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 2nd 2020, 3:54 pm | |
| | |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 2nd 2020, 5:29 pm | |
| | |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 2nd 2020, 5:31 pm | |
| Posts are driven 5ft deep...they are marking each one to cut to 48" for the top rail now. Kubota skid steer is a handy tool.  | |
|
| | |
TheQuig
Posts : 2602
Join date : 2013-02-28
Age : 71
Location : The Jersey Shore
| | Subject: Re: Fence Project October 3rd 2020, 9:14 pm | |
| Any concrete for the posts, or are they feel enough it isn't necessary?
When I was younger and drive a concrete mixer, you knew your day was going to be long when you had a load of 10 yards and you were doing fence posts.
____________________________________
Don't believe everything you read on the internet- George Washington.
| |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 4th 2020, 10:22 am | |
| Topsoil here is 3ft deep max, then its hardpan caliche. This whole area is an ancient inland seabed. Basically driving the posts into limestone. The posts are solid. | |
|
| | |
theshyguy
Posts : 1049
Join date : 2013-04-24
Age : 41
Location : Lubbock Texas
| | Subject: Re: Fence Project October 4th 2020, 11:31 pm | |
| Going to last a lifetime. | |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 5th 2020, 1:49 pm | |
| | |
|
| | |
TheQuig
Posts : 2602
Join date : 2013-02-28
Age : 71
Location : The Jersey Shore
| | Subject: Re: Fence Project October 5th 2020, 9:51 pm | |
| That's a lot of fence posts. It looks like they are doing a nice job.
____________________________________
Don't believe everything you read on the internet- George Washington.
| |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 6th 2020, 8:51 am | |
| They have completed all the pipework, painted about 2/3rds of it and started building the gates yesterday. Should run the woven wire today and maybe finish it up. Tomorrow morning at the latest. | |
|
| | |
Diesel Dan
Posts : 1727
Join date : 2013-02-28
Age : 53
Location : Columbia TN
| | Subject: Re: Fence Project October 6th 2020, 11:55 pm | |
| Looking good!
Wish we had access to pipe like that. | |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 7th 2020, 8:35 am | |
| | |
|
| | |
pup
Posts : 2130
Join date : 2013-02-28
Age : 56
Location : Allen TX
| | Subject: Re: Fence Project October 7th 2020, 8:35 am | |
| | |
|
| | |
TheQuig
Posts : 2602
Join date : 2013-02-28
Age : 71
Location : The Jersey Shore
| | Subject: Re: Fence Project October 7th 2020, 9:16 pm | |
| That looks really good. Your dog will have a nice place to run. I like the type wife you picked.
____________________________________
Don't believe everything you read on the internet- George Washington.
| |
|
| | |
rustbucket
Posts : 367
Join date : 2013-03-02
Age : 71
Location : western Wisconsin
| | Subject: Re: Fence Project October 10th 2020, 12:58 pm | |
| Pup, you've really got yourself a fence!! In the early '70's I installed fences for a living (chain link mostly) and even then we noticed the decline in the quality of materials especially in the subcontract work we did for Sears. Terminal posts that were once Schedule 40 or Schedule 80 in the bigger diameters became steel tubing and the chain link fabric went from 9 gauge to 11 1/2 gauge. The quality of the fittings and ties declined as well. Nice to see something done really well. | |
|
| | |
Diesel Dan
Posts : 1727
Join date : 2013-02-28
Age : 53
Location : Columbia TN
| | Subject: Re: Fence Project October 15th 2020, 9:15 pm | |
| | |
|
| | |
theshyguy
Posts : 1049
Join date : 2013-04-24
Age : 41
Location : Lubbock Texas
| | Subject: Re: Fence Project October 31st 2020, 8:17 pm | |
| Looks great and much bigger than your old yard. | |
|
| | |
Sponsored content
| | Subject: Re: Fence Project | |
| |
|
| | |
| | Fence Project | |
|
Home 
Search 
Latest images 
Register 
Log in 
